Strutconfigurator
System · cable ladder

Cable ladder: for heavy cables and long spans

A cable ladder carries heavy power cables over longer spans than a tray. Open, well ventilated and with rungs to tie cables to. In the configurator you choose depth, width and finish, and lay the cables on it.

Short answer

A cable ladder consists of two side rails with rungs between them, usually 60, 100 or 150 mm deep and 100 to 1,000 mm wide, in 3 or 6 m lengths. Rungs sit at 250 to 300 mm centres. Choose a ladder for heavy power cables, long spans and industrial environments.

Cable ladder: for heavy cables and long spans500100Section300Plan · rung centresPower 5G168 × single layerLadder500×100FinishHDG
cable ladderOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

When should you choose cable ladder over cable tray?

For heavy cables and long spans. The open construction dissipates heat well and you tie cables to the rungs. In industry, energy, infrastructure and for power in data centres the ladder is standard; for light data cables a cable basket is often more practical.

What sizes of cable ladder are there?

Side rail depth sets how much cable fits and how stiff the ladder is.

Common cable ladders
Side rail (mm)Thickness (mm)Rung centres (mm)Widths (mm)
601.5250100 to 1,000
1001.5300100 to 1,000
1502.0300100 to 1,000

Source: catalogues from two manufacturers (brand-independent standard catalogue). Lengths 3,000 and 6,000 mm.

Which finish suits your environment?

Pre-galvanised indoors in dry areas, hot-dip galvanised (60 to 70 µm on ladders) outdoors and in industry, and stainless 316 for marine, offshore and chemical sites. Marine cable ladder is designed for vibration and salt water.

How do you support cable ladder?

On trapeze brackets with a 41×41 or heavier beam, on cantilever arms along walls, or on floor-standing H-frames. The configurator counts bends, inside and outside risers, tees and couplers. On long straight runs, add expansion couplers for thermal movement.

Frequently asked questions

What is the difference between cable ladder and cable tray?

A ladder has rungs and is open; a tray has a (perforated) base. A ladder carries heavier cables over longer spans.

What is the rung spacing of a cable ladder?

Usually 250 mm on 60 mm ladders and 300 mm on 100 and 150 mm ladders, at centres (manufacturer data).

What is marine cable ladder?

Cable ladder for ships and offshore, made to resist vibration and salt water, usually in stainless 316 or hot-dip galvanised.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day