Strutconfigurator
Sector · industry and petrochemical

Industry and petrochemical: heavy, galvanised and vibration-proof

In plants and process installations, heavy power cables run over long distances, through areas with vibration, moisture and chemicals. That calls for heavy ladders, robust channel and a finish that lasts for years.

Short answer

In industry and petrochemical sites, use heavy 100 or 150 mm cable ladders on cantilevers and trapezes of 41×41 or back-to-back channel. Hot-dip galvanised steel (HDG) is the baseline; in aggressive environments choose stainless 316. Watch vibration, expansion over long runs and access for maintenance.

Industry and petrochemical: heavy, galvanised and vibration-proof500100Section300Plan · rung centresPower 5G168 × single layerLadder500×100FinishHDG
industry and petrochemicalOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

What does an industrial environment demand?

Vibration from machines and pumps, temperature changes, moisture, dust and sometimes chemicals. Joints must stay tight, routes must be able to expand and everything must remain accessible for inspection.

Advice for industry
RequirementAdvice
Heavy power, long spansCable ladder 100 or 150 mm, 41×41 or back-to-back beam
Moisture, outdoorsHot-dip galvanised (HDG), 60 to 70 µm on ladders
Chemicals, aggressive environmentStainless 316
VibrationSpring channel nuts, lock nuts, extra supports
Long straight runsExpansion couplers

Cantilever or trapeze?

Along walls, columns and pipe racks, cantilevers and christmas trees work well. In halls with steelwork, hang trapezes from the beams with beam clamps. H-frames carry routes across floors and roofs. The configurator has all four.

Which systems do you use in a plant or process installation?

The configurator covers every system below. You combine them in one configuration, with one bill of materials.

  • Cable ladders of 100 or 150 mm on trapezes hung from steelwork with beam clamps
  • Cantilevers and christmas trees along columns and pipe racks
  • H-frames for routes across floors, platforms and roofs
  • Back-to-back channel for heavy beams and long spans

Frequently asked questions

Which finish for an industrial environment?

Hot-dip galvanised (HDG) as the baseline. In chemical or very damp environments, stainless 316.

How do you stop joints loosening through vibration?

With spring channel nuts, lock nuts or spring washers, and extra support points. Follow the manufacturer's installation instructions.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day