What makes marine cable ladder different?
A marine ladder is more compact and stiffer, with closer rung spacing, and made of stainless 316 or hot-dip galvanised steel. It is meant for ships, platforms and port areas where salt, vibration and movement come together.
| Requirement | Advice |
|---|---|
| Salt water, spray | Stainless 316 |
| Vibration, movement | Marine ladder, locking joints |
| Dissimilar metals | Isolation against galvanic corrosion |
| Little space | Compact ladders on cantilevers |
What should you watch during installation?
Use fixings of the same material as the ladder: stainless on stainless. Galvanised bolts in stainless ladders corrode quickly. Allow for the requirements of the classification society and the specification of the yard or client.
Which systems do you use on board and offshore?
The configurator covers every system below. You combine them in one configuration, with one bill of materials.
- Marine cable ladders in stainless 316, with closer rung spacing
- Cantilevers and arms on bulkheads and decks
- Locking joints that do not shake loose under vibration
- Fixings of the same material as the ladder
Frequently asked questions
Why stainless 316 rather than 304 at sea?
Stainless 316 contains molybdenum and resists chlorides in salt water better. Stainless 304 can suffer pitting corrosion in salty environments.
What is galvanic corrosion?
Corrosion that occurs when two different metals touch in a damp environment. Prevent it with the same material or with isolation between them.